There are two kinds of push to talk settings: settings for use and for connecting to the service. You may receive the settings for connecting to the service as a configuration message from your network operator or service provider.

To access the settings for connecting to the service, press Menu, and select Push to talk, Settings, and Configuration settings.

You can then select from the following:

• Configuration. Only the configurations that support the push to talk service are shown. Select a service provider, or Default, or Personal config. for push to talk service. You may receive the push to talk settings as a configuration message.
• Account and select a push to talk service account contained in the active configuration settings.
• Select one by one to set the following: PTT user name, PTT password, and Server address .

To access the push to talk settings for use, press Menu, and select Push to talk, Settings, and PTT settings.

You can then select from the following:

• 1 to 1 calls and On to enable the reception of incoming one-to-one calls. If you select Off, you can make but not receive one-to-one calls. The service provider may offer some services that override these settings.
• 1 to 1 calls and Notify to set the phone to first notify you of incoming one-to-one calls with a ringing tone.
• Listened groups and On to activate the listened groups.
• PTT status in startup and Yes to set the phone to automatically connect to the push to talk service when you switch the phone on.
• Send my PTT address and No to hide your push to talk address from group and one-to-one calls.