 |
After you have installed the Nokia Modem Options, you need
to make the settings for your Nokia 6800 using the Nokia Modem
Options. To do this:
- Connect your phone to your PC via cable or infrared.
- Start the Nokia Modem Options by going to My Computer>Control
Panel>Nokia Modem Options. The Nokia Modem Options user
interface should open up.
- Select the appropriate phone and connection method (Nokia
6800 IrDA/cable) from the Installed Nokia Modems
list. (Only phones that are installed and that support GPRS
& HSCSD are shown). If your phone is not visible, click
the Refresh button. If you installed both connection methods,
you must make the Nokia Modem option settings for both connection
methods.
- Next, under Data connection, make the GSM data
connection settings if you are going to use GSM data.
- Under Speed, select 9.6 kbits/s if the
service provider you are using does not support high-speed
data (HSCSD) or if you have problems when making a data
call. Use speeds of 14.4 kbits/s or higher only if you
are sure that the service provider you are using supports
high-speed data (HSCSD). If in doubt, check with your
service provider.
- Select the Connection method. Check whether your
service provider supports Modem, ISDN V.110 or
ISDN V.120.
- If you are going to use a GPRS connection, enter the GPRS
Access Point name. You should receive this information
from your service provider.
- When you are ready, click OK.
If you installed both connection methods (Cable and Infrared)
you should now return to step 3 of the instructions and make
the settings for the second connection method.
|
