 |
|
|
  |
|
|
|
You
may receive the MMS Settings Over The Air (OTA) as a text
message or you can key them in manually.
Press Menu, and select Messages, Message
settings and Multimedia msgs..
- Save sent messages. Select Yes to set the
phone to save the sent multimedia messages in the
Sent items folder. If you select No, the sent
messages are not saved.
- Allow multimedia reception. Choose No,
Yes or In home network to use multimedia
service. If you choose In home network, you cannot
receive multimedia messages when outside your home
network.
- Incoming multimedia messages. Select Retrieve
to set the phone to automatically fetch received multimedia
messages, or select Reject if you do not wish
to receive multimedia messages.
- Connection settings. Define the WAP connection
settings for retrieving multimedia messages. Activate
the connection set where you want to save the connection
settings and then edit the settings.
- Settings’ name. Key in the new name for
the connection set and press OK.
- Homepage. Key in the homepage address
of the WAP service that you want to use, press
 for
a dot, and press OK.
- Session mode. Select Permanent
or Temporary.
- Data bearer. Select GPRS.
- GPRS access point. Key in the access
point name and press OK. An access point
name is needed to establish a connection to a
GPRS network. You obtain the access point name
from your network operator or service provider.
- IP address. Key in the address, press
 for
a dot, and press OK. You obtain the IP
address from your network operator or service
provider.
- Authentication type. Select Secure
or Normal.
- User name . Key in the user name and
press OK.
- Password. Key in the password and press
OK.
- Allow adverts. You can receive or reject
advertisements.
|
|
|
|
Show
me... 
Show
me... 
