After
you have installed the Nokia Modem Options, you need to
make the settings for your Nokia 7210 using the Nokia
Modem Options.
To do this:
Connect your phone to your PC via cable or infrared.
Start the Nokia Modem Options by going to My
Computer > Control Panel > Nokia Modem
Options. The Nokia Modem Options user interface
should open.
Select the appropriate phone and connection method
(Nokia 7210 IrDA/cable) from the Installed
Nokia Modems list. (Only phones that are installed
and that support GPRS and HSCSD are shown). If your
phone is not visible, click the Refresh button.
If you installed both of the connection methods, you
must configure the Nokia Modem option settings for
both connection methods.
Next, under Data connection, configure the
GSM data connection settings, if you are going to
use GSM data.
Under Speed, select 9.6 KBits/s
if the service provider you are using does not
support high-speed data (HSCSD) or if you have
problems making a data call. Use speeds of 14.4
KBits/s or higher only if you are sure that the
service provider you are using supports high-speed
data (HSCSD). If in doubt, check with your service
provider.
Select Connection method. Check whether
your service provider supports Modem, ISDN V.110
or ISDN V.120.
If you are going to use a GPRS connection, enter
the GPRS Access Point name. You should receive
this information from your service provider.
When you are ready, click OK.
If you installed both connection methods (Cable
and Infrared) you should now return to step 3 of the
instructions and configure the settings for the second
connection method.
Get
the latest version of Nokia Modem
software from the Nokia
web site >>.
