| |
 |
Setting Up Your Phone for a Browser Service
You can set up your Nokia 7600 phone for a browser service either by saving the service settings received as a message or by keying the service settings in manually.
Saving the service settings received as a message
You may receive the service settings as an Over The Air (OTA) message from the network operator or service provider that offers the service you want to use.
For more information and the appropriate settings, contact your network operator or service provider that offers the service. The settings may be available, for example, on their Web site.
- To save the received settings, press Options and select Save.
If no settings are saved yet under Active service settings, the new settings are saved under the first free connection set.
- To view or discard the received settings, press Options and select View or Discard.
Keying in the service settings manually
You can key in the service settings manually or define and edit them with Nokia PC Suite.
- Press Menu in standby mode, and select Services, Settings and Connection settings.
- Select Active service settings to activate the connection set where you want to save the service settings.
- Scroll to the set you want to activate and press Activate.
- Select Edit active service settings.
- Select and key in the settings below according to the information you have received from your network operator or service provider.
- Settings' name: Key in the new name for the connection set and press OK.
- Homepage: Key in the homepage address of the service that you want to use (press
 for a dot) and press OK.
- Proxies: Select Enable or Disable. If you enable the proxies, you can edit the Primary proxy and Secondary proxy settings.
- Bearer settings: Define the following settings:
- GPRS access point: Key in the access point name and press OK.
- Authentication type: Select Secure or Normal.
- Login type: Select Manual or Automatic. If you select Automatic, the phone uses the User name and Password settings that you have defined.
- User name: Key in the user name and press OK.
- Password: Key in the password and press OK. This setting is shown only if the Login type setting is Automatic.
|
|
