Troubleshooting for Nokia N9

Many features in your Nokia Lumia phone increase the demand on battery power and reduce the battery life time. For example if the signal strength of the mobile network varies much in your area, your phone must scan for the available network repeatedly. This increases the demand on battery power.

You can set your phone to automatically save power when the battery charge level is low. To check the battery status, and switch battery saver mode on, go to Settings > battery saver. Windows Phone 8: To choose when you want battery saver mode to be activated, switch Battery saver toggle to On and tap advanced.
Note: When Battery Saver is on, your phone will no longer: automatically receive email and calendar updates, update some Live Tiles and allow apps to run in the background.

If you are listening to music or otherwise using your phone, but do not want to make or receive calls, switch airplane (flight) mode on under the Settings menu.

To save battery power, note the following: 

Background apps

1. Set your phone to check for new mail less frequently or even by request only. On the start screen, open up the email account you want to modify, and tap the three dots (...) in the right bottom corner of the inbox screen, and then tap Settings > sync settings and change the setting for Download new content.
2. Some apps may run in the background unnecessarily. On the start screen, swipe left, tap Settings, swipe to applications and tap background tasks. Tap the app you want to block, and tap block. Especially Lumia 520, 620, 720, 810, 820, 822 and 920 users; please check that Nokia Drive+ Beta app is blocked (set to Off) in background tasks.
3. Close the apps you are not using, to do that, press Back key. For example, when you are finished taking a picture, press the Back key to exit the camera viewfinder. 
   

The screen

1. Set the screen switch off after a short time, go to Settings > lock screen (Lock+wallpaper) and change the setting for Screen times out after.
2. Lower the screen brightness, go to Settings > brightness > Level. Switch the Automatically adjust to Off and select the level. 
   

Use network connections selectively

1. Switch Bluetooth off when you do not need it, go to Settings > Bluetooth, and then slide the Status (Searching and discoverable) toggle to Off.
2. Use a Wi-Fi connection to connect to the internet, rather than a mobile data (E, G, 3G, H+, 4G) connection.
3. Stop your phone scanning for available Wi-Fi networks if those are not available, go to Settings > WiFi (Windows Phone 8: Advanced), and uncheck the box next to Notify me when new networks are found.
4. Switch off location services if not needed – so the phone will not look up your location frequently in the background (Settings > Location services > Off).
5. Use NFC on only when needed. To switch the tap+send feature off, go to Settings > tap+send, and switch NFC sharing toggle to Off.
6. Switch off Connect with Xbox LIVE when you not need it, go to Settings, swipe to applications and tap games.
7. Windows Phone 8: Stop your phone connecting to Xbox Music cloud collection go to Settings > Applications > Music+Videos, and switch all relevant settings off. 
   

Anything else I need to know?

• Always charge the battery fully. Check Settings > battery saver > battery information. Note that older chargers may not fully charge the battery.
• Mute unnecessary sounds and functions, such as key press sounds and vibra. To do that, go to Settings > ringtones+sounds.
• Use wired headphones, rather than the loudspeaker.
• Make sure that your phone is running the latest software to get battery related improvements. Please check also that your phone apps are up-to-date. 

The instructions to save power on your Lumia phone presented on this video (English) from Nokia Care.

If the battery drains faster even there is no active feature or applications, try to switch off the power and then switch back on. The battery may also be worn out and needs to be replacing with a new one.

1. Restore the original factory settings on your Nokia phone. For information on how to do this, see your Nokia phone's user guide (your personal data is not deleted in the reset). Retry.
2. Contact your network operator to check that Internet browsing (data connection) is included in your service contract (SIM card). Also verify that roaming is supported when you are not within your home network.
3. Make sure your Nokia phone is running the latest software. For downloads and assistance, go to ýour local Nokia website's support page.

If your device isn't recognized by PC when plugging via USB cable, try the following actions to recover:

1. Check that you are using the original Nokia USB cable and that the cable is properly connected to the phone and PC.
   
2. Disconnect the mobile device and connect it again.
3. Remove the battery, insert it back again and restart your mobile device. In phone models with integrated battery, press the  power button for around 10 seconds
   
4. Restart your PC.
5. Try connecting to another USB port on your PC. Connect the phone directly to your PC instead of connecting e.g. via a USB hub.
   
6. In Symbian devices, try selecting another connection mode in your mobile device (e.g. Nokia Suite/PC Suite, Mass Storage, Media Transfer). Note that when connecting to Nokia Suite, you need to select Nokia Suite/PC Suite mode (check the connection mode in Settings > Connectivity > USB).
   
7. In some Symbian devices, if having copied a large number of files (> 4000 files) in Media Transfer USB mode to the device, the PC connection may not succeed any more. If this happens, try deleting files with File Mgr. application to decrease the number of files below 4000.
8. If running Nokia Suite in the PC, check that the latest Nokia Suite version is installed (check for updates in Nokia Suite Software Updates menu). Check also that your phone is compatible with Nokia Suite.
   
9. If Nokia Suite is not able to find your Symbian or S40 phone, try reinstalling Nokia Suite software in your PC.
   
10. If possible, check if your phone can be successfully connected to another PC.
    

If the above actions don't help, reset the device back to factory settings.

Check also that you have the latest device software version installed in your mobile device.

If your memory card or mass memory is not working properly, check the following:

1. Use only compatible memory cards approved by Nokia for use with your device. Check the user guide or the technical specifications at Nokia support pages for more details
   
2. Check that the memory card is properly inserted in the memory card slot. Push the memory card to the bottom of the slot.
3. If possible, test with another memory card to see if the issue is in the memory card.
4. Check that the device is not connected to PC. Depending on the device and the connection mode, the PC may reserve the mass memory and memory card for exclusive use and the memory drives cannot in this situation be accessed from the mobile device. Unplug your device from PC and try again.
   

If the memory card or mass memory is not working properly, try backing up any data from your device's memory card or mass memory to your PC, then format the memory card or mass memory by using your Nokia device. Depending on your device, the memory card can usually be formatted in one of the following applications (select the application, open the desired memory device and in the available options select the command to format the memory card or mass memory):

• File mgr.
• Memory tool
• Memory card tool

Refer to your device's user guide for more information on how to format the memory card or mass memory.

If you get an error message during the formatting process or an error message after formatting stating that your device cannot read the memory card volume or mass memory, take the memory card or Nokia device (in case you have internal mass memory in your device) to your nearest Nokia care point.

Warning: Formatting your memory card or mass memory will permanently erase all data stored on the memory card or mass memory. Please back up all data stored on your memory card or mass memory before formatting.

Important: The memory card or mass memory inside your Nokia device should ONLY be formatted using your Nokia device. Do not attempt to format your memory card on another device such as a PC, otherwise your memory card may not work properly.
 

The screen gets turned off during a phone call when the proximity sensor is covered. This is done to avoid accidental touch screen actions when you are in a call.

If the screen gets turned off immediately when dialing a number or receiving a call, check that the proximity sensor area at the upper front of the screen is not covered by any kind of protective film or tape.

You can take the following steps to check the issue. If the screen keeps turned off, the protector may not be of the right size and will block the sensor on the upper part of the front side. Then either remove the protector or cut off the plastic from the blocking area.

1. Make or receive a call with the phone.
2. Once the phone is in a call place your hand 1cm above the screen and display will turn off.
   
3. Remove your hand and display shall turn back on.
   
4. Repeat the test steps 1,2,3 for 3 times to verify the proximity sensor function.

This FAQ applies to Nokia Lumia phones with Windows Phone 8, and a computer running on Windows 7, Vista or Windows 8. If you have Windows XP use the search field on this page to find this related FAQ: What should I do if my Nokia Lumia phone is not recognized by a computer running Windows XP?

Preparations:

Start by disconnecting your phone and other USB devices connected to your PC. Exit the PC software, such as Nokia Suite, Zune and Windows Media Player, which can establish a USB connection at the background. Use Ctrl+Alt+Del to see and manage processes that are running on your PC.

Check that you have latest updates installed on your PC

Here are two options to follow (ensure that Administrative rights are available):

Option 1

1. Update your computer (with the phone connected) by going to www.update.microsoft.com (IE opens Windows Update automatically).
   
2. If an update WinUsb Device is found select it and click Install.

Option 2

1. Go to Microsoft Update download catalog page (link works only in IE) http://catalog.update.microsoft.com/v7/site/home.aspx.
   
2. Search for 'Windows Phone WinUSB'.
3. Add the driver to the download basket and press view basket to proceed checkout.
4. Download the file to your computer.
5. Extract downloaded .cab file with eg. Winzip.
6. In Device manager click 'Update Driver software', 'Browse my computer for driver software', search for the directory you extracted the files and click Next.
7. The "RM-xxx|Nokia Lumia xxx" will be replaced by "Windows Phone WinUSB"

Check your USB connection

Make sure that you are using the USB cable which was included with your phone. You may also try another port on the computer, but do not use a USB hub or the ports located on the front of your computer. Most versions of Windows (excluding Windows RT) allow you to connect to your Lumia with Windows Phone 8 by using Windows Explorer, which you can use to validate that you have an active connection.

Check and update your device driver

1. Click Start, right-click Computer, and then click Properties.
   
2. Click Device Manager, located in the left column.
   
3. A window will appear with the name of your computer and a list of devices. If you do not see the devices, click the name of your computer.
4. Connect your phone and swipe up on the home screen, and make sure it is unlocked. The name of your Nokia Lumia should be listed under Portable Devices.
   - If there is no entry in the Device Manager for your phone, your computer is not recognizing that the phone is connected to it. Start your phone without the micro-SD card (if your phone has micro-SD slot), once bootup has finished connect the USB cable, and try again. Also, you may try connection with another phone.
   - If the device status indicates that there is a problem, note the error codes indicated and continue to troubleshoot this issue by using the step 5.
5. Right-click the name of your phone and then click Update Driver Software. Select Search automatically for updated driver software, Windows does find a driver and installs it as WinUsb Device. After the driver installation is complete, close the open windows until you exit the Device Manager. If you are prompted to restart your computer, do so.

Confirm that your PC is able to communicate with Windows Update service through firewall(s).

1. On your PC, go into the Control Panel.
   
2. Open the Windows Firewall, turn the Firewall Off.
   
3. Connect your phone and then turn the Firewall back On.

You can also use the Windows Phone app, which is a free app for PC and Apple Mac. With the app, you can sync media content between your computer and your phone. This includes the music, pictures, videos, movies, ringtones, and podcasts on your computer that you want to copy to your phone. Windows 8 installs the app automatically. With Windows 7, you can download it from www.windowsphone.com. If you have a Mac, to download and install the Windows Phone app, go to the Mac App Store.