Find a visible, easily-accessible spot for your holder on the dashboard of your car.
Some treatments on the dashboard or dirt on the suction cup may result in a significantly less effective bond, so before you start, remove such treatments, and make sure that the cup is clean.
- Place the mounting plate in a good spot on the dashboard. Press down firmly and evenly.
- Make sure the mount locking lever is released, and position the holder on the mounting plate.
- Press down the holder, and snap the mount locking lever closed.
Remove the holder from the dashboard
- Push the mount locking lever inwards, and lift from the
tab on the edge of the suction cup.
Depending on the material of the dashboard, the mounting plate may leave a mark on the surface.