Nokia E6-00 - Insert the SIM card and battery

Important: This device is designed to be used with a standard SIM card (see figure) only. Use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card. Please consult your mobile operator for the use of a SIM card that has a mini-UICC cutout.A standard SIM card.

  1. Switch the phone off.

  2. Pull the back cover release latch towards the bottom of the phone, and remove the cover.

    With the back of the phone facing you, the release latch is at the bottom of the back cover.
  3. Remove the battery, if inserted.

    Lift the side of the battery that is closer to the top edge.
  4. Use your fingernail to carefully pull out the SIM card holder. The holder cannot be removed.

  5. Make sure the contact area of the card is facing down, and insert the SIM card. Push the holder carefully back into place.

    With the back of the phone facing up and the bottom edge facing you, the SIM card holder is on the right on the top edge of the battery compartment.
  6. Line up the battery contacts, and insert the battery.

    The battery contacts are at the bottom right of the battery and the battery compartment.
  7. Direct the top locking catches toward their slots, and press down until the cover locks into place.

Remove the SIM card

  1. Switch the phone off.

  2. Remove the back cover.

  3. Remove the battery, if inserted.

  4. Use your fingernail to carefully pull out the SIM card holder. The holder cannot be removed. Remove the SIM card.

    With the back of the phone facing up and the bottom edge facing you, the SIM card holder is on the right on the top edge of the battery compartment.

Related topics