Troubleshooting for Nokia 700

You should uninstall the UMU MS full application from the Nokia Belle device before upgrading to Nokia Belle Refresh or Nokia Belle FP2.

If you have upgraded via Nokia Suite, the UMU MS full application will reset phone when you launch it. We recommend uninstalling the application.

The UMU MS full application has been removed from Nokia Store. The problem in the application is under the investigation of a third party. The application should not be reinstalled until issues have been fixed by the third party.

In case you have downloaded and paid the UMU MS full application from Nokia Store, contact Nokia Care to receive a refund.

The talk time is up to 7.3 hours (GSM) or up to 4.7 hours (WCDMA), standby time is up to 465 hours (GSM) or 450 hours (WCDMA), video playback time is up to 6.9 hours, and music playback time is up to 47 hours.

To check the unique Wireless Local Area Network (WLAN) Media Access Control (MAC) address that identifies your Nokia phone, enter *#62209526# in the idle mode (or with touch screen phones after opening the dialler).

You can unplug the charger when the battery indicator shows that the battery is full. For the first and consecutive charges, charging the battery can take up to 2 hours. It is not recommended to keep the charger connected longer. The first charge is not different from the other charges.

Note: When charging through a USB port, the charging might take longer than 2 hours.

Corning® Gorilla® Glass is known for better durability, which is preventing the scratches from further propagating in comparison to a normal glass.

While stronger than normal, is still made of glass, and improper use can result in scratches and breakages. If the screen is still not looking normal, please see the repair options at your local Nokia support pages. Please note that liquid and physical damage are not covered by the warranty.

Nokia products with Corning® Gorilla® Glass are listed here .

There are two different reset commands available to restore the factory settings in Nokia Symbian^3 devices (e.g. Nokia N8-00, E7-00, C7-00, Astound, C6-01, 700). The commands can be found in Menu > Settings > Phone > Phone management > Factory settings:

1) Restore

• This command restores the original (i.e. factory) settings and does not affect documents or files stored on the device.
  
• Email settings need to be recreated after the reset.
  
• This command is the same as the command *#7780# typed on the keypad.
  

2) Delete data and restore

• This command restores the original (factory) settings and deletes all content from mass memory (E:), also the pre-loaded content including e.g. widgets. The command deletes also all user content from the phone memory (C:).
  
• All the settings need to be recreated after the reset and the applications reinstalled.
  
• This command is the same as the command *#7370# typed on the keypad.
  
• Note that all the user files on E: mass memory and C: phone memory will be deleted, e.g. the photos and videos. It is therefore important to copy the user data before resetting the device. Use Ovi Suite to take a full backup of the device contents.
  
• Don't use this command unless necessarily needed because some of the pre-installed applications (e.g. Web TV widgets) may get deleted and need to be reinstalled via Ovi Store or from Menu > Applications > SW Update.
  

When resetting the device, you may be prompted to give a lock code. If the lock code has not been changed, the default code is 12345.

Before resetting, end all active calls and connections. If necessary, select the offline profile and check that there are no WLAN connections active.

You can use your Symbian^3 device (e.g. Nokia N8-00) as a modem to connect your PC or laptop to internet in the following way:

1. Install Nokia Suite in your PC or laptop.
2. Check that you have a SIM card inserted in your phone and that the phone is not in offline mode.
3. Connect your phone via USB cable or Bluetooth connection to your PC or laptop (USB connection preferred because it provides a faster and more reliable connection). When connecting via USB, check that the phone is using Nokia Ovi Suite mode (check the default mode in Menu > Settings > Connectivity > USB).
4. Accept any installation requests which you may receive in your phone.
5. In Nokia Suite, select Tools > Connect to internet.

The internet connection is now established via your phone. To disconnect, select Tools > Disconnect in Nokia Suite.

If the connection doesn't succeed, check the connection settings in Nokia Suite menu Tools > Options > Connect to internet. Select your network operator from the list or, if not found, use the manual settings and define the access point name to be used in your operator network. You can also define the user name and password if these are required by your operator.

You can set up email either using the New mailbox wizard on the home screen or by selecting Menu > Mail > New mailbox.

1. Select Email provider from the list (for example Gmail).
2. Enter your email address and password, select OK.
3. The mailbox is created.

The following email service types can be set up:

• Exchange ActiveSync (for corporate email)
• Hotmail or Gmail using ActiveSync
• Direct POP/IMAP connection to email server 

All the mailboxes can be accessed in a single location in Menu > Mail or via Inbox on the home screen widgets.

If your email service is not found in the list, select Other and enter you email address and additional info if requested. You can change settings later by by selecting Menu > Mail > Settings > (mailbox name). The incoming and outgoing mail server settings can in this case be found in Mailbox settings > Advanced mailbox settings.

Note: You can set up an email mailbox also by using a Wireless connection. If you are setting up yours first mailbox (other than Exchange ActiveSync), you need to have the SIM card inserted into the device. Otherwise the Exchange ActiveSync is the only available selection.

Press the Power key > Activate power saving. To deactivate power saving mode, press the Power key > Deactivate power saving.

When activated, the power saving mode turns off some functions automatically. Radio configuration in power saving mode include the cellular radio (it is set to 2G/GSM only mode), the Bluetooth radio (it is turned off) and the Wi-Fi/WLAN radio (scanning for new networks in turned off but existing networks keep functioning). The power saving mode also reduces display power consumption by minimizing screen brightness and by turning off touch screen feedback and theme effects. In addition the vibra alerts are turned off in a power saving mode.