If you see an error such as SSL Certificate is not trusted this means that the certificate is missing on the device or has expired. You will need to install the certificate in either of the two ways described below. There are two methods to install the certificate.
Note: To IT Admins, if you wish to stage this Entrust certificate (or any other certificate file) on your own file delivery server then you will need to place the certificate file (i.e. filename.cer) on a remote server accessible to your employees. Ensure your web delivery servers are configured to deliver the *.cer files with the mime-type: "application/x=x509-ca-cert".
Note! Self-signed certificate is not supported.
If you cannot access any websites in the browser, check the APN settings. Select settings > configuration > personal configurat..
To see WLAN MAC address of your phone, follow the steps below:
To avoid unintentional activation of touch controls, the automatic keylock cannot be disabled.
When you start Mail for Exchange for the first time, you are prompted to do the following:
If you defined the Exchange items to be synced, the first sync will be done.
To ensure that Mail for Exchange suits your needs, you should consider the following:
To personalise your Mail for Exchange, you can do the following:
For detailed instructions on downloading and setting up Mail for Exchange on your Nokia Asha 302 phone please also see the following video:
Make sure the mobile data is turned on. In notifications bar, select mobile data.
Applies for Nokia Asha 305, 306, 308 and 309.
If the touch screen calibration is interrupted by pressing Call key or End key, the applied settings may cause instability when using the touch screen or the Call and End keys. In such situation, the calibration should be done again.
To view the size of available memory on your device, select Menu > Settings > Phone (or Phone settings or Device) > Memory status.
The number indicates the active phone line. This indicator is shown only if the SIM card supports two subscriber numbers, that is, two phone lines.
Press and hold # to select Line 1 or Line 2 for making calls and sending text messages, you see a prompt Change the phone line if you have subscribed to this service. When the first line is selected, indicator 1 is shown in the standby mode.
When you remove the SIM card, the number indicator disappears from the display.