Weight (SS）194.8grams (including battery)
Weight (DS) NA
Dimensions Height 166.7 mm x Width 76.62mm x Thickness 8.79mm
Volume 112.27 cm³
Weight1 356.3g(Dish) / 327.3g(OM) Dimensions 148mm*189mm*62mm(Dish) / 90mm*180mm*62mm(OM) Volume 1734.26 cm3 (Dish) / 1004.40 cm3 (OM) Material 300g gsm FBB carton,G-flute/170g C1S/100g fluting/140g
Materials and substances:
Through careful material selection we aim to reduce the environmental impact of our products. The list below shows the estimated proportions of the materials used to create this mobile device.
Metals: E.g. iron, copper, zinc, aluminum. Our products contain ~0.1-0.2% precious metals. Ceramic materials: Glass. Plastics: E.g. PC, PET, epoxy. Battery: E.g. lithium cobalt compound, graphite, aluminium, copper. Other: PCB and mixed.
We proactively manage and keep track of all the substances in our products, not just those that raise concerns. We have strict requirements for substances that are not allowed in our products.
This product fully complies with all relevant global regulations, for example:
Additionally, we have voluntarily restricted the use of many other harmful substances, and called attention to substances such as skin sensitizers and substances that might cause harm to the environment or to the user during the lifecycle of the product. Some details of such substances for this product are listed below:
The supplied battery complies with the EU Battery Directive 2013/56/EU and does not contain cadmium, lead, or mercury in concentrations higher than those defined in the directive.
The supplied charger meets US CEC and DOE on Energy Efficiency of external power supplies.
Call (GSM): 512.05 mW
Idle mode (DS): NA
Idle mode: 19.25 mW
Battery capacity: 5000 mA
Battery weight: 66.41 grams
Input voltage: 100-240 V
Input AC Frequency: 50/60 Hz
Output voltage: 5.0/9.0 V
Output current: 3/2 A
Output power: 15/18 W
Average active efficiency: 81.39%
Efficiency at low load (10 %): 84.92%
Charger no-load power consumption: 0.075 W
Charger weight: 48.48 grams
We work to minimize the environmental impact of our packaging by selecting sustainable materials, reducing the packaging size, reducing the volume of material we use, and considering what happens to the package when it is no longer needed.
Our packaging contains no hazardous or restricted substances, and is fully compliant with the US directive TPCH.
Always return your used electronic products, batteries, and packaging materials to a dedicated recycling collection point. This way you help prevent uncontrolled waste disposal and promote the recycling of materials.
All mechanical parts as well as packaging materials have been marked where practically possible. Plastic parts are marked in accordance with ISO 11469 and ISO 1043-1 to -4 standards.
This product and its battery have been marked with the crossed-over wastebasket symbol (WEEE Directive) to signify that they must not be disposed of with regular household waste and need to be taken instead to an appropriate collection point.
¹Weight might vary depending on e.g. product variant
²The measured values are dependent on several factors, e.g. measurement environment, frequency and operator network settings. The measurements are made @ 1800 MHz according to reference document: GSM Association Official Document: DG.09, ‘Battery Life Measurement Technique’ http://www.gsma.com/newsroom/technical-documents/