User guides and manuals

Nokia 2720

Set up and switch on your phone

Learn how to insert the SIM card, memory card, and battery, and how to switch on your phone.

Nano-SIM

Important: This device is designed to be used with a nano-SIM card (see figure) only. Use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card.

MicroSD memory cards

Use only compatible memory cards approved for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.

error_outline

Note: Switch the device off and disconnect the charger and any other device before removing any covers. Avoid touching electronic components while changing any covers. Always store and use the device with any covers attached.

Set up your phone

  1. Remove the back cover.
  2. If the battery is in, lift it out.
  3. Slide the SIM card holder to the left and open it up. Place the nano-SIM in the slot face down, close down the holder and slide it to the right to lock it in place.
  4. If you have a dual-SIM phone, slide the SIM2 holder to the left and open it up. Place the nano-SIM in the SIM2 slot face down, close down the holder and slide it to the right to lock it in place. Both SIM cards are available at the same time when the device is not being used,but while one SIM card is active, for example, making a call, the other may be unavailable.
  5. Put back the battery.
  6. Put back the cover.

Insert the memory card

  1. Remove the back cover.
  2. If the battery is in, lift it out.
  3. Slide the memory card in the memory card slot.
  4. Put back the battery.
  5. Put back the cover.

Switch on your phone

Press and hold the power key until the phone vibrates.

Select which SIM card to use

  1. Press the scroll key and select Settings > Network & Connectivity > SIM manager.
  2. To choose which SIM to use for calls, select Outgoing Calls, and select SIM1 or SIM2.
  3. To choose which SIM to use for messages, select Outgoing messages, and select SIM1 or SIM2.
  4. To choose which SIM to use for mobile data, select Data, and select SIM1 or SIM2.
thumb_up_alt

Tip: To be able to distinguish your SIM cards, give them a descriptive name. In the SIM manager settings, select each SIM card, type in the name, and select Save.

Did you find this helpful?

Change language

Choose location
Choose language

Contact support

Tutorial videos