Learn how to insert the SIM card, memory card, and battery, and how to switch on your phone.
Micro and nano SIM
Important: To use this phone, you need a micro-SIM card. If you have a dual-SIM phone, you need a micro-SIM card and a nano-SIM card. Use only original micro and nano-SIM cards. Use of incompatible SIM cards may damage the card or the phone, and may corrupt data stored on the card.
MicroSD memory cards
Use only compatible memory cards approved for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card.
Note: Switch the device off and disconnect the charger and any other device before removing any covers. Avoid touching electronic components while changing any covers. Always store and use the device with any covers attached.
Set up your phone
Place your fingernail in the small slot at the bottom of the phone, lift and remove the cover.
If the battery is in the phone, lift it out.
Slide the SIM into the SIM slot with the contact area face down.
If you have a memory card, slide the memory card into the memory card slot.
Line up the battery contacts, and put the battery in.
Replace the back cover.
Insert the second SIM
If you have a dual-SIM phone, slide the SIM2 holder to the right and open it up.
Place the nano-SIM in the SIM2 slot face down.
Close down the holder and slide it to the left to lock it in place.
Switch on your phone
Press and hold the power key until the phone vibrates.
Select which SIM card to use
Press the scroll key and select Settings > Network & Connectivity > SIM Manager.
To choose which SIM to use for calls, select Outgoing Calls, and select SIM1 or SIM2.
To choose which SIM to use for messages, select Outgoing Messages, and select SIM1 or SIM2.
To choose which SIM to use for mobile data, select Data, and select SIM1 or SIM2.
Tip: To be able to distinguish your SIM cards, give them a descriptive name. In the SIM Manager settings, select each SIM card, type in the name, and select Save.
Remove the SIM card
Open the back cover, remove the battery, and slide the SIM out.
If you have a dual-SIM phone, slide the SIM2 holder to the right and open it up. Remove the nano-SIM, close down the holder, and slide it to the left to lock it in place.
Remove the memory card
Open the back cover, remove the battery, and pull the memory card out.
Your phone and SIM card use different codes for security.
PIN or PIN2 codes: These codes protect your SIM card against unauthorized use. If you forget the codes or they aren't supplied with your card, contact your network service provider. If you type in the code incorrectly 3 times in a row, you need to unblock the code with the PUK or PUK2 code.
PUK or PUK2 codes: These codes are required to unblock a PIN or PIN2 code. If the codes are not supplied with your SIM card, contact your network service provider.
Security code: The security code helps you protect your phone against unauthorized use. You can set your phone to ask for the security code that you define. Keep the code secret and in a safe place, separate from your phone. If you forget the code and your phone is locked, your phone will require service. Additional charges may apply, and all the personal data on your phone may be deleted. For more info, contact the nearest care point for your phone, or your phone dealer.
IMEI code: The IMEI code is used to identify phones in the network. You may also need to give the number to your care point services or phone dealer. To view your IMEI number, dial *#06#. Your phone’s IMEI code is also printed on your phone label, which is located under the battery. The IMEI is also visible on the original sales box.