Publications

Black needles of La(3)Mo(4.33)Al(0.67)O(14) were prepared by electrolytic reduction at 1100C of a melt containing Na(2)MoO (4), MoO(3) and La(2)0(3) held in an alumina crucible.

The crystal structure of La sub (1.85) Sr sub (.15) CuO sub 4 has been determined at 300, 60, and 10k by neutron diffraction powder profile analysis.

We have determined the crystal structures of Li(3.3)Mo(6)S (8) and Li(3.2)M0(6)Se(8), Chevrel phases formed by the insertion of lithium into Mo(6)S(8) and Mo(6)Se(8), by Neutron diffraction power p

We determined the crystal structures of three lithium titanates with host structures based on cubic close packed oxygen arrays by neutron diffraction powder profile analysis.

Glasses of compositions corresponding to high T sub c superconductors have been made by roller quenching from the melt for the series Bi sub 2 Sr sub 2 Ca sub (x) Cu sub (1-x) O sub (delta), with 1

Transmission electron microscope studies of Ti-doped, congruent lithium niobate (LiNbO sub 3) have shown that extended structural faults and domain boundaries are only present within the Ti diffuse

This paper describes the Communications and Tasking Kernel, or CTK, which is a small, efficient Kernel for a shared-memory multiprocessor.

Problem. A curious property of 1/7 is that to two decimal places it equals 2 x 7 percent, that is .02 x 7. Add .o2 sup 2 x 7 and you obtain 1/7 to four decimal places.

The mathematical formulae and methods adopted for computing the permissible continuous rating of power cables are outlined, and examples for cables installed under specified conditions are worked o

We report on the onset of reverse bias diode leakage due to CVD selective tungsten deposition on (a) progressively shallow n+(As)/p diodes made by implantation into silicon and (b) n+(As or P)/p or