Nokia IP Trainings in deutscher Sprache

Course Description

This course is entirely devoted to providing students with comprehensive hands-on training on SR OS fundamentals. The course starts with basic (CLI) Command Line Interface navigation, IP networking and continues with the OSPF and IS-IS routing protocols MPLS and SR OS Service and Quality of Service.

This course consists of a combination of theoretical discussion to develop an understanding of, and practical hands-on exercises to reinforce the basic concepts and principles associated with deploying, monitoring and maintaining SR OS Services on IP/MPLS networks.

• Course number: ER00147-V-2000
• Price: €2975
• Duration: 5 days
• Die Kurse werden in deutscher Sprache gehalten, die Kursmaterialen werden jedoch in englischer Sprache zur Verfügung gestellt. 

Audience:

This course is intended for the network personnel responsible for the operations, administration and maintenance activities that support SR OS based service provisioning.

Recommended prerequisites: 

• Understanding of basic IP concepts, Technical English.
• TER36095W 7750 SR/ 7450 ESS Product Overview, or another product overview as defined by the customer.

Course Objectives:

At the end of this course, the student will have hands-on experience on how to use the Service Routing Operating System (SR OS), including basic system configuration, routing protocols, MPLS, different types of layer-2 and layer-3 services, and Quality of Service.

Course Content:

1 - SR OS CLI Introduction and IPv6
    1.1 - Card MDA Provisioning Lab
    1.2 - Port Configuration Lab
    1.3 - System Verification Lab
    1.4 - IP Interfaces Lab
    1.5 - IPv6 Interface Configuration Lab
2 - OSPF
    2.1 - OSPF Configuration Single-Area Lab
3 - IS-IS
    3.1 - Basic IS-IS Configuration Single-Area Lab
4 - LDP
    4.1 - LDP Configuration Lab
5 - RSVP-TE
    5.1 - RSVP-TE Configuration Lab
6 - Services
    6.1 - Services MTU OAM Lab
    6.2 - Epipe Lab
    6.3 - VPLS Lab
    6.4 - IES Lab
    6.5 - VPRN Lab
    6.6 - Mirror Service Lab
7 - Quality of Service
    7.1 - QoS Lab

Course Description

This course is intended for students who have a good understanding of SR-OS capabilities, such as system configuration and CLI, IP networking and the OSPF and IS-IS routing protocols, as well as how MPLS can be used to create tunnels that will carry customer traffic and for traffic engineering and resilience.

This course covers troubleshooting topics such as troubleshooting methodology, available tools and common problems related to the different protocols running on IP/MPLS platforms. Also, the course describes how to escalate an issue to the Nokia support team.

• Course number: TER36065-V-1700
• Price: €1785
• Duration: 3 days
• Die Kurse werden in deutscher Sprache gehalten, die Kursmaterialen werden jedoch in englischer Sprache zur Verfügung gestellt. 

Target Group:

Network Operations, Network Provisioning, Network Design, Network Engineering

Objectives:

At the end of this course, the student will be able to understand and apply troubleshooting methods, including event logs, OAM tools and SAA, common problems and solutions related to hardware, layers 1 & 2, routing protocols (OSPF and IS-IS), MPLS, as well as a description of how to escalate an issue to the Nokia support team.
 

Recommended prerequisites:

• TER36067K-001 CLI and Interior Gateway Protocol Provisioning, TER36067K-002 SROS Multiprotocol Label Switching Provisioning.

• TER36095W 7750SR/ 7450ESS product Overview, or other Product Overview as defined by the customer

Contents:

Course Outline:

1. Troubleshooting methodology

   1. The DIRE approach

2. Troubleshooting tools

   1. Event logs - OAM tools – SAA

3. Common connectivity problems

   1. Hardware and layer 1-2 common problems

4. Troubleshooting routing protocols

   1. Common issues with OSPF and IS-IS protocols

5. Troubleshooting MPLS

   1. Common issues with LDP and RSVP-TE

6. Escalating an issue to the Nokia support team

   1. Procedure and contact information

Lab Exercises:

1. Nokia Support

2. Debug Logs and Log filters

3. Sending debug output to a Syslog Server

4. Using OAM tools and SAA

5. Troubleshooting Hardware Faults

6. Troubleshooting OSPF

7. Troubleshooting ISIS

8. Troubleshooting LDP

9. Troubleshooting RSVP