Loop Transients at the Customer Station By R. L. CARROLL and P. S.
Constrained coding is used in recording systems to translate an arbitrary sequence of input data to a channel sequence with special properties required by the physics of the medium, Very often, mor
The basic requirements for low-loss splices are (i) accurate alignment, (ii) good fiber ends, and (Hi) accurate diameter control.
Squares cross-section glass tubes have been used to splice AT&T polarization maintaining fibers with an average splice loss of 0.14 dB.
This paper proposes a single instruction multiple data (SIMD) processor, which is programmed with high-level OpenCL language.
Light transmission losses of single-mode fiber splices depend on the alignment accuracy of the fiber ends relative to each other.
In such a grading (with s groups and n trunks per "sub-group") Longley's coefficients do not differ appreciably from their limiting values for infinite traffic per group.
Traditional 1 + 1 optical layer protection is implemented by creating two signals from one via a 3-dB splitter (with similar to3-dB insertion loss) and transmitting both signals along two different
In any telephone connection, energy can be reflected back to the talking customer at any impedance discontinuity or at any junction between four-wire and two-wire circuits.
Multimode optical fibers whose cores have parabolic distributions of the refractive index, 1 - 3 (1) are of great practical interest for light transmission over long distances, since their delay di
