It has been shown recently that Au labeling (V.C. Venezia et al., Appl. Phys. Lett.
Laser microprobe mass spectrometry (LMMS) is a relatively new analytical technique as it is applied in the micro-electronics industry.
Determining the cross-sectional doping profile of very small metalâ"oxideâ"semiconductor field effect transistors and specifically the direct measurement of their channel length is necessary for
Determining the cross-sectional doping profile of very small MOSFETs and specifically the direct measurement of their channel length is necessary for true channel engineering to be possible.
Body electrical loss analysis (BELA) is a measurement of the electrical losses caused by the human abdomen when placed into an alternating magnetic field.
As consumers enjoy new streaming media services from the Internet, network providers are being left with the bill for managing the traffic load that is growing at an explosive rate.
As the industry moves to more mature software processes (e.g., CMMI) there is increased need to adopt more rigorous, sophisticated (i.e., quantitative) metrics.
One drawback to deploying wavelength division multiplexed (WDM) synchronous optical network (SONET) rings is the potentially large amount of equipment necessary for their deployment, Wavelength add
We analyze the benefits of network sharing between telecommunications operators.
A significant problem associated with batteries is the rapid reduction of chargestorage capacity with increasing charge/discharge rate.
