Skip to main content
Displaying 41 - 50 of 38197

The purpose of this paper is to completely describe the low and high frequency performance including microwave noise parameters of 0.25 mum Fully depleted (FD) silicon-on-insulator (SOI) devices an

This paper describes two integrated RF receivers with low noise and high linearity for GSM900 and DCS1800 base stations. The chips were fabricated using a 0.25-mum BiCMOS process.

This paper describes two integrated RF receivers with low noise and high linearity for GSM900 and DCS1800 base stations. The chips were fabricated using a 0.25-μm BiCMOS process.

The AlGaAs/GaAs selectively doped heterostructure transistor (SDHT) is ideally suited to a submicron recess etch gate process, since the channel of the FET is confined to a two-dimension electron g

A cursory examination of a visible laser beam incident on any refracting or reflecting system will show that energy is scattered from the laser beam.

We report the performances of a 0.7-µm InP/GaInAs DHBT developed in III-V Lab demonstrating both fT and fMAX of 400 GHz as well as a high fabrication yield and homogeneity on a 3-inch wafer.

The first 10 Gbit/s DWDM transmission at 12.5 GHz spacing without polarisation division multiplexing or polarisation interleaving is demonstrated.

We demonstrate the first 10Gb/s DWDM transmission at 12.5GHz spacing without polarization division multiplexing or polarization interleaving.

We demonstrate the first 10Gb/s DWDM transmission at 12.5GHz spacing without polarization division multiplexing or polarization interleaving.

There has been considerable interest over the last several years in convenient sources of THz radiation.

Explore more

Video

Nokia Bell Labs innovation timeline

Podcast

A bit of tech: Episode 1- A Century of Innovation