Publications

Displaying 19181 - 19190 of 37748

Low phase noise laser source packaged in a low power consumption module for all optical sampling applications

Using low power consumption photonic modules containing a low timing jitter optical laser source and an optical gate, we demonstrated potential all-optical sampling of a radio signal carried at &gt

Low phase noise optical oscillator at 30Ghz using a quantum dash mode-locked laser associated with an optical self injection loop

Quantum dash mode-locked laser are very simple sources to generate a low linewidth tone over an optical signal.

Low power AC/DC on-board converters for rectified AC power distribution demonstrator for telecommunication

This paper presents a comparison between two low power (12 W) AC/DC on-board power converters to be used in an AC distributed architecture for telecommunication applications.

Low Power CMOS Burst-Mode Laser Driver for Full Service Access Network Application

A burst-mode laser driver for use in 155 Mb/s and 50Mb/s passive optical networks (ATM-PON/FSAN, N-PON, pi-PON) uses mixed signal design techniques in a standard 0.5 micron CMOS process to achieve

Low Power Hybrid Optical Driver and Receiver Circuits for Optical Interconnect Experimentation.

While there has been much discussion in the literature regarding optical interconnects within future generations of large-scale computer systems, little experimental work exists investigating a fun

Low Power Nonlinear MIN/MAX Filters Implemented in the CMOS Technology

A novel current-mode, binary-tree, asyn- chronous, nonlinear Min/Max lter is presented.

Low Power Wide Area Network Technologies for IoT: Availability, Design Choices and Implications

The connectivity requirements of Internet of Things (IoT) are remarkably different from broadband applications and often conflicting.

Low pressure chemical vapor deposition of borophosphosilicate glass films produced by injection of miscible DADBS-TMB-TMP liquid sources.

This study is a follow-up of earlier work in which the concept of injecting miscible liquid precursors into an LPCVD reactor was implemented for the preparation of BPSG films from a mixture of tetr

Low pressure chemical vapor deposition of tantalum silicide.

A process for the deposition of tantalum disilicide by Low Pressure Chemical Vapor Deposition (LPCVD) is described.

Low Pressure Chemical Vapor Deposition of Tungsten and Aluminum for VLSI Applications

This paper reviews the current status of LPCVD tungsten and aluminum for VLSI applications.